Physical AI Introduction Seminar Unitree G1 editionFrom the basics of robot utilization to actual robot experiments, you can take the first step in introducing it in one day.
This is a one-day (approximately 6 hours) introductory seminar for corporations where you can experience the actual operation and behavior of the humanoid robot "Unitree G1," lectures on the latest trends in physical AI, discussions on how to use it in your own business, and individual PoC consultation. We will flesh out your company's implementation roadmap while experiencing the performance and limitations of the robot, which cannot be understood from catalogs or videos alone.
Inquiries and estimates for introduction seminars
Physical AI introduction seminar
Unitree G1 editionFrom the basics of robot utilization to actual robot experiments, take the first step in introducing it in one day.
Understand the latest trends in physical AI and how to use it in your company
Organize the current status of rapidly evolving physical AI such as VLA (Visual/Language/Behavior Model), World Model, and Sim2Real reinforcement learning. We will improve the specific resolution of which business you should start with, such as manufacturing, logistics, security, infrastructure, etc.
Experience the operation and behavior of the actual Unitree G1
You can directly experience the stability of bipedal walking, range of motion of joints, gripping force, operating noise, safety distance, and operation from startup to emergency stop with the actual Unitree G1 machine owned by EmplifAI, which cannot be understood from catalogs or videos.
Organize how to proceed from introduction, development, and data collection, and points to consider during PoC
Rather than suddenly introducing it on a large scale, we will design a PoC plan that will not fail in one day, including ``cutting out one process'', ``pre-diagnosing the floor surface and flow line using on-site 3D scanning,'' ``data collection by remote operation (teleoperation),'' and ``verifying feasibility with rental.''
1-day (approximately 6 hours) program details: From systematic lectures in the morning to G1 actual robot experiments and PoC design in the afternoon
For corporate teams who are following the latest trends in robots, but don't know how to apply them to their own workplaces, we will organize knowledge systemization in the morning, and in the afternoon we will hold hands-on sessions with actual machines and workshops on issues facing our company.
Lecture/system organization: From the trends of physical AI to the mechanism and implementation design of Unitree G1
We will systematically explain the latest global trends, the hardware and software structure of Unitree G1, and the steps for on-site implementation so that everyone from management and planning positions to engineers can have a common language.
Latest trends and industrial impact of physical AI
- "Automation of the physical world" that comes after LLM: Fundamentals and limitations of VLA model, World Model, and Sim2Real
- Comparison of global humanoid/double-arm robot development competition (Unitree / AgiBot / ROBOTIS / Figure, etc.)
- Examples of advanced implementation and ROI concepts in manufacturing, logistics warehouses, facility security, and construction infrastructure
Overview of Unitree G1 (robot/performance/use examples)
- Unitree Definitive differences between the G1 standard model and the secondary development compatible "G1 EDU" (degrees of freedom, computing device, SDK)
- Nikkei BP "Unitree G1 thorough disassembly and analysis report" Control architecture explanation by the software chapter writers
- How to use high-level control (walking/balance maintenance) and low-level control (upper body precision tasks/hand control)
How to proceed with implementation (environment, system, data, development flow)
- “On-site 3D scan diagnosis (uneven floor/aisle clearance)” and virtual trial run that should be performed before purchasing a robot
- Remote operation (teleoperation) → Operation data collection → Practical flow of imitation learning/VLA fine tuning
- Step-by-step PoC design starting from internal system creation, safety evaluation (risk assessment), and rental
It doesn't end with just a CG concept video. 6 demonstration labs for “virtual verification x real machine implementation”
A typical simulator exhibition ends at the stage of ``moving in virtual space,'' but in actual field implementation, friction on the floor, differences in height, communication delays, and misalignment in gripping become obstacles. At the EmplifAI introductory seminar, you can experience and compare six technical areas that actually work, from 3D spatial measurement in millimeters (Real to Sim), Isaac Sim virtual verification, and VLA/whole body control (Sim to Real) on the actual Unitree G1 machine.
G1 × Gemini Argon VLALab
From vision to action: Verification of autonomous grasping without relying on fixed motion
Challenge: Even if the position of the object changes, can the robot grasp it based on the camera image?
A/B comparison verification points (seminar commentary/demonstration target)
Comparing conventional control (A), which repeats predetermined coordinates, and VLA control (B), in which Gemini 4 Argon recognizes the actual camera image and generates a gripping plan. We will explain an robot experiment in which PET bottles are conveyed upright using Unitree G1 and Inspire Hand, and the judgment mechanism.
4 steps starting with a seminar: Verify virtually, run on robot, and grow using on-site data
The one-day seminar is not a goal, but a starting line for moving forward with the introduction of robot with minimal risk. At each stage, clarify the "questions to confirm" and move on to the next phase when the conditions are cleared.
1-day introduction seminar/hands-on with robot
“Which work in our company should we target with humanoids?”
At this seminar, you will be able to experience the actual Unitree G1 and unify the perspectives of management, planning, development, and the field. Identify automation candidate tasks and PoC validation themes in one day.
On-site 3D scanning & virtual commissioning (Real to Sim)
"Can we pass through our company's aisles, floors, and equipment layout? How many vehicles do we need?"
XGRIDS Lixel K2 creates a 3D digital twin of the target site down to the millimeter level. Diagnose floor irregularities, steps, and aisle clearances and pre-verify flow lines and work on Isaac Sim.
1-process robot PoC/data collection (Sim to Real)
“Can we grasp real objects, transport them, and link them with existing equipment?”
Verify the feasibility of one process using actual machines such as Unitree G1 at Yushima Robot PoC facility or your company's site. We will collect remote control data and verify the VLA/imitation learning model.
On-site implementation, operator training, and in-house production
“Can we safely operate it every day at the site and expand it laterally to other bases?”
We will prepare the operational flow for safety evaluation, operation log recording (Robot Black Box), remote monitoring, and intervention in the event of an abnormality, and will accompany you until technology transfer to the in-house team and in-house production.
With Unitree G1, implementation of physical AI is realized “while experiencing”
Select your desired event format, number of participants, and priority theme and press the button, and the information will be automatically reflected in the inquiry form at the bottom of the page (it takes 30 seconds; you can contact us even if the schedule and details have not been finalized).
Why doesn't implementation fail if you start with a one-day seminar?
Management, planning, field, and development perspectives can be aligned in one day
By having discussions while operating the same Unitree G1 in front of your eyes, misunderstandings about ``what can be done and what is still difficult'' are eliminated, and internal consensus is reached much faster.
Can be evaluated from both virtual space (Sim) and real machine (Real)
In addition to simple robot operation, you can grasp the overall picture necessary for actual operation, including on-site diagnosis using 3D scanning, virtual verification using Isaac Sim, and data collection and VLA learning using remote control.
You can take home a “1-step PoC plan” that you can start working on the next day.
Through use case discussions and individual consultations in the afternoon, we will organize the first process to be tackled at your company's site, as well as the required period, budget, and verification steps.
Physical AI Introduction Seminar Unitree G1 edition Overview
- program name
- Physical AI Introduction Seminar Unitree G1 edition (1-day intensive program for corporations)
- Target
- Corporations considering introducing robot/physical AI (management, business, development, field departments, etc.)
- Format/time
- 1-day training (approximately 6 hours: 3 hours of lecture in the morning + 3 hours of hands-on robot, discussion, and individual consultation in the afternoon)
- Venue
- EmplifAI Training space (Tokyo, Yushima/Aomi) or a venue designated by your company (onsite business trip negotiable)
- Capacity
- Small group system (1 company reserved, number of participants negotiable)
- Use robot・Environment
- Unitree G1 robot, remote control/data collection environment, 3D digital twin simulation environment
Frequently asked questions
Is it held individually (privately) for each company?
Yes, as a general rule, sessions are reserved for each company, so you can feel free to discuss and consult individually, including confidential on-site issues and new business ideas.
Is it possible to shorten the tour to half a day or additionally tour other models (AgiBot G2, RealMan, OpenShell, etc.)?
Yes, it can be adjusted according to your request. We also accept half-day executive sessions for executives and configurations that combine EmplifAI's dual-arm robots (OpenShell / AgiBot G2 / RealMan RMC-AIDAL) and 3D scanners (XGRIDS Lixel K2) with actual demonstrations.
Please tell us about the process leading up to the event.
After making your inquiry, we will conduct a 30-minute online preliminary interview to learn about participating departments, number of participants, and topics of interest, and then present a program proposal and estimate. Once the schedule is confirmed, we will hold a one-day seminar on the same day.
With Unitree G1, implementation of physical AI is realized “while experiencing”
Please feel free to contact us using the form below to discuss event dates, adjust curriculum to suit your company's issues, or request a quote.
Inquiries and estimates for introduction seminars